Certification Provider: Fortinet
Exam: NSE 4
Exam Code: NSE4 v7.0
Total Question: 131
Question per Quiz: 60
Updated On: 21 March 2023
Note: In order to practice all the Q/A's, you have to practice multiple time. Question's and Answer's will be presented randomly and will help you get hands-on for real exam.
1.
Which of the following SD-WAN load -balancing method use interface weight value to distribute traffic? (Choose two.)
2.
Refer to the exhibit. Examine the intrusion prevention system (IPS) diagnostic command. Which statement is correct if option 5 was used with the IPS diagnostic command and the outcome was a decrease in the CPU usage?
3.
Refer to the exhibit to view the authentication rule configuration. In this scenario, which statement is true?
4.
What is the primary FortiGate election process when the HA override setting is disabled?
5.
Which CLI command will display sessions both from client to the proxy and from the proxy to the servers?
6.
Refer to the exhibit. How will FortiGate process the traffic when the HTTP request comes from a machine with the source IP 10.0.1.10 to the destination http:// www.fortinet.com? (Choose two.)
The exhibit shows proxy policies and proxy addresses, the authentication rule and authentication scheme, users, and firewall address.
An explicit web proxy is configured for subnet range 10.0.1.0/24 with three explicit web proxy policies.
The authentication rule is configured to authenticate HTTP requests for subnet range 10.0.1.0/24 with a form-based authentication scheme for the FortiGate local user database. Users will be prompted for authentication.
7.
Which two statements are true about the RPF check? (Choose two.)
8.
Refer to the exhibit, which contains a session list output. Based on the information shown in the exhibit, which statement is true?
9.
Refer to the exhibit. Which two changes can the administrator make to deny Webserver access for Remote-User2? (Choose two.)
The exhibit contains a network diagram, firewall policies, and a firewall address object configuration.
An administrator created a Deny policy with default settings to deny Webserver access for Remote-user2. Remote-user2 is still able to access Webserver.
10.
Refer to the exhibits. The exhibits show the SSL and authentication policy (Exhibit A) and the security policy (Exhibit B) for Facebook. Users are given access to the Facebook web application. They can play video content hosted on Facebook but they are unable to leave reactions on videos or other types of posts. Which part of the policy configuration must you change to resolve the issue?
11.
Which three authentication timeout types are availability for selection on FortiGate? (Choose three.)
12.
Which engine handles application control traffic on the next-generation firewall (NGFW) FortiGate?
13.
Which two attributes are required on a certificate so it can be used as a CA certificate on SSL Inspection? (Choose two.)
14.
Refer to the exhibit. The exhibit contains a network interface configuration, firewall policies, and a CLI console configuration. How will FortiGate handle user authentication for traffic that arrives on the LAN interface?
15.
Refer to the FortiGuard connection debug output. Based on the output shown in the exhibit, which two statements are correct? (Choose two.)
16.
Which two statements are correct about a software switch on FortiGate? (Choose two.)
17.
Which three criteria can a FortiGate use to look for a matching firewall policy to process traffic? (Choose three.)
18.
Which three methods are used by the collector agent for AD polling? (Choose three.)
19.
Refer to the exhibit. An administrator is running a sniffer command as shown in the exhibit. Which three pieces of information are included in the sniffer output? (Choose three.)
20.
Which CLI command allows administrators to troubleshoot Layer 2 issues, such as an IP address conflict?
21.
Which two statements about SSL VPN between two FortiGate devices are true? (Choose two.)
22.
Which two settings can be separately configured per VDOM on a FortiGate device? (Choose two.)
23.
FortiGate is operating in NAT mode and is configured with two virtual LAN (VLAN) subinterfaces added to the same physical interface. In this scenario, which statement about VLAN IDs is true?
24.
Which of the following statements is true regarding SSL VPN settings for an SSL VPN portal?
25.
Which statement correctly describes NetAPI polling mode for the FSSO collector agent?
26.
You have enabled logging on your FortiGate device for Event logs and all Security logs, and you have set up logging to use the FortiGate local disk. What is the default behavior when the local disk is full?
27.
An organization's employee needs to connect to the office through a high-latency internet connection. Which SSL VPN setting should the administrator adjust to prevent the SSL VPN negotiation failure?
28.
Which two protocols are used to enable administrator access of a FortiGate device? (Choose two.)
29.
Which of the following statements about backing up logs from the CLI and downloading logs from the GUI are true? (Choose two.)
30.
Refer to the exhibit to view the firewall policy. Which statement is correct if well-known viruses are not being blocked?
31.
What are the two results of this configuration? (Choose two.)
An administrator has configured the following settings:
config system setting
set ses-denied-traffic enable
end
config system global
set block -session-timer 30
end
32.
Examine the two static routes shown in the exhibit, then answer the following question. Which of the following is the expected FortiGate behavior regarding these two routes to the same destination?
33.
Based on the raw logs shown in the exhibit, which statement is correct?
34.
In consolidated firewall policies, IPv4 and IPv6 policies are combined in a single consolidated policy. Instead of separate policies. Which three statements are true about consolidated IPv4 and IPv6 policy configuration? (Choose three.)
35.
Which two statements are correct regarding FortiGate HA cluster virtual IP addresses? (Choose two.)
36.
Which of the following are valid actions for FortiGuard category based filter in a web filter profile UI proxy-based inspection mode? (Choose two.)
37.
An administrator is configuring an IPsec VPN between site A and site B. The Remote Gateway setting in both sites has been configured as Static IP Address. For site A, the local quick mode selector is 192.168.1.0/24 and the remote quick mode selector is 192.168.2.0/24. Which subnet must the administrator configure for the local quick mode selector for site B?
38.
Refer to the exhibit. Why did FortiGate drop the packet?
39.
By default, FortiGate is configured to use HTTPS when performing live web filtering with FortiGuard servers. Which two CLI commands will cause FortiGate to use an unreliable protocol to communicate with FortiGuard servers for live web filtering? (Choose two.)
40.
A team manager has decided that, while some members of the team need access to a particular website, the majority of the team does not Which configuration option is the most effective way to support this request?
41.
An administrator has configured a strict RPF check on FortiGate. Which statement is true about the strict RPF check?
42.
Which two statements are correct regarding FortiGate FSSO agentless polling mode? (Choose two.)
43.
IPS Engine is used by which three security features? (Choose three.)
44.
Which two configuration settings are synchronized when FortiGate devices are in an active-active HA cluster? (Choose two.)
45.
Refer to the exhibits. Based on the system performance output, which two statements are correct? (Choose two.)
Exhibit A shows system performance output. Exhibit B shows a FortiGate configured with the default configuration of high memory usage thresholds.
46.
Refer to the exhibit. Which IP address will be used to source NAT the traffic, if the user on Local-Client (10.0.1.10) pings the IP address of Remote-FortiGate (10.200.3.1)?
The exhibit contains a network diagram, central SNAT policy, and IP pool configuration.
The WAN (port1) interface has the IP address 10.200.1.1/24.
The LAN (port3) interface has the IP address 10.0.1.254/24.
A firewall policy is configured to allow to destinations from LAN (port3) to WAN (port1).
Central NAT is enabled, so NAT settings from matching Central SNAT policies will be applied.
47.
In an explicit proxy setup, where is the authentication method and database configured?
48.
Which type of logs on FortiGate record information about traffic directly to and from the FortiGate management IP addresses?
49.
Which two policies must be configured to allow traffic on a policy-based next-generation firewall (NGFW) FortiGate? (Choose two.)
50.
What is the limitation of using a URL list and application control on the same firewall policy, in NGFW policy-based mode?
51.
An administrator has configured two-factor authentication to strengthen SSL VPN access. Which additional best practice can an administrator implement?
52.
An administrator must disable RPF check to investigate an issue. Which method is best suited to disable RPF without affecting features like antivirus and intrusion prevention system?
53.
Why does FortiGate keep TCP sessions in the session table for several seconds, even after both sides (client and server) have terminated the session?
54.
Which two types of traffic are managed only by the management VDOM? (Choose two.)
55.
How do you format the FortiGate flash disk?
56.
A network administrator is configuring a new IPsec VPN tunnel on FortiGate. The remote peer IP address is dynamic. In addition, the remote peer does not support a dynamic DNS update service. What type of remote gateway should the administrator configure on FortiGate for the new IPsec VPN tunnel to work?
57.
Which two VDOMs are the default VDOMs created when FortiGate is set up in split VDOM mode? (Choose two.)
58.
An administrator needs to configure VPN user access for multiple sites using the same soft FortiToken. Each site has a FortiGate VPN gateway. What must an administrator do to achieve this objective?
59.
Which two statements about antivirus scanning mode are true? (Choose two.)
60.
If Internet Service is already selected as Destination in a firewall policy, which other configuration objects can be selected to the Destination field of a firewall policy?