Certification Provider:
Exam: NSE 4
Exam Code: NSE4 v7.0
Total Question : 131
Question per Quiz: 60
Updated On: 21 March 2023
Note: In order to practice all the Q/A's, you have to practice multiple time. Question's and Answer's will be presented randomly and will help you get hands-on for real exam.
1.
Which three criteria can a FortiGate use to look for a matching firewall policy to process traffic? (Choose three.)
2.
Refer to the exhibit. Given the interfaces shown in the exhibit, which two statements are true? (Choose two.)
3.
An administrator is configuring an IPsec VPN between site A and site B. The Remote Gateway setting in both sites has been configured as Static IP Address. For site A, the local quick mode selector is 192.168.1.0/24 and the remote quick mode selector is 192.168.2.0/24. Which subnet must the administrator configure for the local quick mode selector for site B?
4.
Refer to the exhibit. Why did FortiGate drop the packet?
5.
Which three statements about a flow-based antivirus profile are correct? (Choose three.)
6.
How do you format the FortiGate flash disk?
7.
An administrator has configured a strict RPF check on FortiGate. Which statement is true about the strict RPF check?
8.
Which two key configuration changes are needed on FortiGate to meet the design requirements? (Choose two.)
A network administrator wants to set up redundant IPsec VPN tunnels on FortiGate by using two IPsec VPN tunnels and static routes.
9.
FortiGate is configured as a policy-based next-generation firewall (NGFW) and is applying web filtering and application control directly on the security policy. Which two other security profiles can you apply to the security policy? (Choose two.)
10.
Which two policies must be configured to allow traffic on a policy-based next-generation firewall (NGFW) FortiGate? (Choose two.)
11.
Which two statements are correct regarding FortiGate HA cluster virtual IP addresses? (Choose two.)
12.
Which feature in the Security Fabric takes one or more actions based on event triggers?
13.
Refer to the exhibit. Based on the raw log, which two statements are correct? (Choose two.)
14.
Which of the following statements is true regarding SSL VPN settings for an SSL VPN portal?
15.
An organization's employee needs to connect to the office through a high-latency internet connection. Which SSL VPN setting should the administrator adjust to prevent the SSL VPN negotiation failure?
16.
Refer to the exhibits. Based on the system performance output, which two statements are correct? (Choose two.)
Exhibit A shows system performance output. Exhibit B shows a FortiGate configured with the default configuration of high memory usage thresholds.
17.
Which statement about the policy ID number of a firewall policy is true?
18.
Refer to the exhibit, which contains a session diagnostic output. Which statement is true about the session diagnostic output?
19.
In consolidated firewall policies, IPv4 and IPv6 policies are combined in a single consolidated policy. Instead of separate policies. Which three statements are true about consolidated IPv4 and IPv6 policy configuration? (Choose three.)
20.
Which statement correctly describes NetAPI polling mode for the FSSO collector agent?
21.
Which CLI command will display sessions both from client to the proxy and from the proxy to the servers?
22.
Refer to the exhibit. What should the administrator do next to troubleshoot the problem?
In the network shown in the exhibit, the web client cannot connect to the HTTP web server. The administrator runs the FortiGate built-in sniffer and gets the output as shown in the exhibit.
23.
A network administrator is configuring a new IPsec VPN tunnel on FortiGate. The remote peer IP address is dynamic. In addition, the remote peer does not support a dynamic DNS update service. What type of remote gateway should the administrator configure on FortiGate for the new IPsec VPN tunnel to work?
24.
Which CLI command allows administrators to troubleshoot Layer 2 issues, such as an IP address conflict?
25.
How does FortiGate act when using SSL VPN in web mode?
26.
Which scanning technique on FortiGate can be enabled only on the CLI?
27.
A network administrator has enabled full SSL inspection and web filtering on FortiGate. When visiting any HTTPS websites, the browser reports certificate warning errors. When visiting HTTP websites, the browser does not report errors. What is the reason for the certificate warning errors?
28.
Which two statements about antivirus scanning mode are true? (Choose two.)
29.
An administrator wants to configure timeouts for users. Regardless of the user’s behavior, the timer should start as soon as the user authenticates and expire after the configured value. Which timeout option should be configured on FortiGate?
30.
An administrator wants to configure Dead Peer Detection (DPD) on IPSEC VPN for detecting dead tunnels. The requirement is that FortiGate sends DPD probes only when no traffic is observed in the tunnel. Which DPD mode on FortiGate will meet the above requirement?
31.
Which two types of traffic are managed only by the management VDOM? (Choose two.)
32.
Refer to the exhibits to view the firewall policy and the antivirus profile. Which statement is correct if a user is unable to receive a block replacement message when downloading an infected file for the first time?
33.
What inspection mode does FortiGate use if it is configured as a policy-based next-generation firewall (NGFW)?
34.
You have enabled logging on your FortiGate device for Event logs and all Security logs, and you have set up logging to use the FortiGate local disk. What is the default behavior when the local disk is full?
35.
Refer to the exhibit, which contains a static route configuration. An administrator created a static route for Amazon Web Services. What CLI command must the administrator use to view the route?
36.
Refer to the FortiGuard connection debug output. Based on the output shown in the exhibit, which two statements are correct? (Choose two.)
37.
If Internet Service is already selected as Destination in a firewall policy, which other configuration objects can be selected to the Destination field of a firewall policy?
38.
What is the limitation of using a URL list and application control on the same firewall policy, in NGFW policy-based mode?
39.
Refer to the exhibit. An administrator is running a sniffer command as shown in the exhibit. Which three pieces of information are included in the sniffer output? (Choose three.)
40.
By default, FortiGate is configured to use HTTPS when performing live web filtering with FortiGuard servers. Which two CLI commands will cause FortiGate to use an unreliable protocol to communicate with FortiGuard servers for live web filtering? (Choose two.)
41.
Refer to the exhibit. The global settings on a FortiGate device must be changed to align with company security policies. What does the Administrator account need to access the FortiGate global settings?
42.
Which two statements about IPsec authentication on FortiGate are correct? (Choose two.)
43.
Which two statements are true about collector agent advanced mode? (Choose two.)
44.
Why does FortiGate keep TCP sessions in the session table for several seconds, even after both sides (client and server) have terminated the session?
45.
Which statement regarding the firewall policy authentication timeout is true?
46.
Refer to the exhibit. Which IP address will be used to source NAT the internet traffic coming from a workstation with the IP address 10.0.1.10?
The exhibit contains a network diagram, virtual IP, IP pool, and firewall policies configuration.
47.
Which type of logs on FortiGate record information about traffic directly to and from the FortiGate management IP addresses?
48.
What two changes can the administrator make to resolve the issue without affecting services running through FortiGate? (Choose two.)
Consider the topology:
49.
FortiGuard categories can be overridden and defined in different categories. To create a web rating override for example.com home page, the override must be configured using a specific syntax. Which two syntaxes are correct to configure web rating override for the home page? (Choose two.)
50.
wo protocol options are available on the CLI but not on the GUI when configuring an SD-WAN Performance SLA? (Choose two.)
51.
Refer to the exhibit to view the firewall policy. Which statement is correct if well-known viruses are not being blocked?
52.
Which three pieces of information does FortiGate use to identify the hostname of the SSL server when SSL certificate inspection is enabled? (Choose three.)
53.
When a firewall policy is created, which attribute is added to the policy to support recording logs to a FortiAnalyzer or a FortiManager and improves functionality when a FortiGate is integrated with these devices?
54.
FortiGate is operating in NAT mode and is configured with two virtual LAN (VLAN) subinterfaces added to the same physical interface. In this scenario, which statement about VLAN IDs is true?
55.
If Internet Service is already selected as Source in a firewall policy, which other configuration objects can be added to the Source field of a firewall policy?
56.
An administrator does not want to report the logon events of service accounts to FortiGate. What setting on the collector agent is required to achieve this?
57.
An administrator needs to configure VPN user access for multiple sites using the same soft FortiToken. Each site has a FortiGate VPN gateway. What must an administrator do to achieve this objective?
58.
Which two statements are true about the RPF check? (Choose two.)
59.
Refer to the exhibit. Given the security fabric topology shown in the exhibit, which two statements are true? (Choose two.)
60.
Which of the following SD-WAN load -balancing method use interface weight value to distribute traffic? (Choose two.)
2 Comments
after submit ,need to show the correct answers
I took NSE4 few days before and Passed. Many question from this Quiz are in Exam. Recommend to take this practice test along with Guide. Quite helpful.
Thank You Practonet 🙂