Technology | 2021-07-14
If you have a wireless network at home or in the office, it is critical to have it secured. Wireless networks are prone to attacks from outsiders – perhaps even more so than with wired networks. This article shows how you can implement 3 techniques to secure a given wireless network.
1. Disable Broadcast SSID
One of the key things to do is to secure a wireless network is to disable broadcast SSID. WiFi WLANs identify themselves with a service set identifier (SSID), which names the network and works (loosely) like a password.
Unfortunately, most wireless access points transmit their SSIDs by default, which is pretty much like standing in the street and shouting your bank card PIN. Unless you have equipment that requires the access point to broadcast the SSID, turn this feature off. If you do leave it on, change the SSID to something other than the default.
2. Turn on WEP
Another thing to do is to turn on WEP, and use 128-bit keys. You shouldn’t rely on WEP to be absolutely secure, but the cracker next door isn’t less likely to have the tools, systems, or know-how to break it. WEP is a lot better than nothing (unless you’re using 64-bit keys, which are far weaker than 128-bit keys).
Access points and adapters typically let you set up the WEP key either by typing a passphrase or by entering a hexadecimal (base 16) value. We’ve had trouble making passphrases work across multiple vendors’ equipment, so we recommend generating a hexadecimal value using a long passphrase and then using the hexadecimal value everywhere. Keep a copy of the key somewhere secure because you can’t be sure you can regenerate it later.
3. Set MAC address restrictions
You should also set MAC address restrictions. Most access points let you list the physical (Media Access Control — MAC) address of equipment allowed to connect to your LAN. A typical MAC address looks something like 00-0C-38-55-F4-AD. You can use a MAC restriction list containing all your devices to ensure only authorized devices connect.
4. Turn on the Router Firewall
One of the easiest ways to stay safe when using a wireless connection is to always have your firewall turned on. It’s enabled even in the default settings most of the time, but in the case, it isn’t, use the router setting page and turn it on.
5. Keep your Router’s Firmware up-to-date
There’s a reason all these creators keep offering new updates for software. In this case, your router has firmware that needs to be upgraded whenever a new upgrade is available. Every new upgrade provides you with a better security system and removes the flaws/glitches that might have been present in an older version. This can be done by regularly checking your router’s vendor’s site and downloading and subsequently installing the new update.
6. Save all your MAC addresses in the Router’s SettingAll the digital devices (cell phones, laptops, etc.) have a MAC address. MAC addresses can be found using the security settings of each device. You can then add all these addresses to your router security settings, so only the tools Ways to Secure Your WIFI whose MAC address is in the settings will be allowed to connect to your internet connection.